LS SWAP KIT >400hp
LS swap kit for the Mazda rx8
Powertrain
• Engine mounting
• Transmission Crossmember
• PPF Delete kit (Differential Support)
• Polyurethane Transmission Mount
• MODIFIED BALANCER
(Engine speed for instrument cluster)
Suspension
• Rack and Pinion Relocation Bracket
• Steering Extension
• Sway Bar Spacers
• Bump Steer Kit
(To correct the geometry of lowering
the rack for oil pan clearance)
Misc
• Clutch master cylinder spacer
• Shifter Relocation
• Mazda A/C Compressor Bracket
Requires (NOT INCLUDED)
C6 ENGINE MOUNTING BRACKET #10349964
C6 ENGINE MOUNTING BRACKET #10349965
QUESTIONS ABOUT THE OPTIONAL PARTS
- DO I NEED THE DROP-IN FUEL PUMP
YES THE FACTORY FUEL PUMP DOES NOT FLOW ENOUGH VOLUME TO CORRECTLY OPPERATE THE LS ENGINE.
- DIFFERETNIAL OPTIONS
THIS KIT IS DESIGNED IN ORDER TO NO LONGER USE THE FACTORY PPF (POWER PLANT FRAME) THAT HOLDS THE ENGINE AND TRANMSISION UP. THAT IS WHY YOU WILL NEED THE RX8 DIFFERENTIAL SUPPORT TO MOUNT THE DIFFERENTIAL INDEPENTANTLY IN THE REAR AS TRADITTIONALY IS DONE THIS MOUNTING DESING IS FAR BETTER FOR MANY DIFFEREANT REASONS
MAZDA DIFFERENTIAL
- MUCH MORE ROOM TO RUN EXHUAST.
- LESS OVERALL WIEGHT OF THE CAR.
- EASIER TO DO REPAIRS OR MAINTANANCE LATER.
- WILL SUPPORT A 4IN DIAMETER DRIVESHAFT
- RECCOMENDED NO MORE THAN 400 RWHP
FORD 8.8 DIFFERENTIAL
- OPTIMIZE GEARING
- PROVEN TO HOLD 1000RWHP
- BETTER FUEL ECONOMY
LS1RX8.COM HEADERS
LS1RX8.COM HEADERS NOW AVAILABLE
- 1-7/8 PRIMARY GOING TO A 3IN V-BAND
- THE HEADERS CAN BE INSTALLED WITH THE ENGINE INSTALLED
!!!!THEY HAVE ONLY BEEN TESTED USING THE LS1RX8.COM SWAP KIT SO FOR OTHER KITS I CANNOT CONFIRM NOR DENY FITMENT!!!!!
Radiator setup
Radiator setup includes
- Radiator
- Cooling fan
- Radiator Mounting
- Upper and lower radiator hoses
********ATTENTION********
THE COOLING HOSES ONLY FIT F-BODY ACCESORIES
Battery relocation kit
Comes with:
Red and black assembled battery cable
Cable holders
Battery bracket
JZ CARS POWER RUN ON DRIVERS SIDE
LS CARS POWER RUN ON PASSENGER SIDE
T56/tr6060 Clutch master Cylinder
clutch line and adaptor
clutch spacer and mounting hardware
LS ACCESSORIES DRIVE KIT
- WATER PUMP WITH GASKETS, THERMOSTAT AND HOUSING
- SERPENTINE BELT AND TENSIONER A/C BELT
- ALTERNATOR WITH BRACKET AND IDLER PULLEY
- STARTER WITH PIGTAIL AND BOLTS
- C6 ENGINE MOUNTING BRACKETS
